Sidi Technology: Cleat Assembly, Hi Tech Sole |
Carbon Sole Replacement
1) Remove the rubber heel pad (screw B).
2) Remove the carbon inserts unscrewing the two screws A.
3) Replace the spare parts carefully, apply the stickers provided as indicated and screw back A and B.
|
|
HI-TECH CARBON SOLE
When fixing the cleat of your pedal to the sole of your SIDI Carbon Sole, the forward-most screw must not penetrate beyond the base of your cleat by more than 6 mm into the sole. For the rearward securing screws, they must not penetrate beyond the base of your cleat more than 6.8 mm into the sole. Use of the wrong length screws could damage your shoes and void the warranty.
|
|
ANTI-SLIP ADHESIVE HI-TECH CARBON SOLE
ANTI-SLIP ADHESIVE: Included in the box of the models that feature Carbon and Full Carbon sole.
We suggest sticking it on the plate of the chosen pedal.
|
|
LOOK KEO CLEAT
1) Remove screw A
2) Place the original Look Keo cleat fixing it with screws C-M5X10mm, use the SiDi screws provided with the spare part purchased separately. We suggest leaving the screws B in place and periodically checking their fixing
|
 |
LOOK CLEAT
1) Remove screw A
2) Place the original Look cleat fixing it with the original Look screws C - M5x12mm
• Note: We suggest leaving the screws B in place and periodically checking their fixing.
|
|
TIME CLEAT
Remove screw A
1) Place the SIDI Spacer
2) Place the magnesium plate fixing it with the appropriate screws C - M5x10mm and D - M5x12mm
3) Place the Time plates, add the washers and fix them with the original SIDI screws E - M4x12mm • Note: Please, use the SIDI screws provided with the spare part purchased separately. We suggest leaving the screws B in place and periodically checking their fixing.
|
|
TIME RXS CLEAT
1) Remove screw A
2) Place the Time RXS cleat with the screws C M5x7 mm (suggested screw length for
SiDi sole).
Note: We suggest leaving the screws B in place and periodically check their fixing.
|
|
SHIMANO SPD SL CLEAT
1) Remove screw A.
2) Place the original Shimano SPD-SL cleat fixing it with the original SiDi screws C-M5X10mm, use the SiDi screws provided with the spare part purchased separately. We suggest leaving the screws B in place and periodically checking their fixing
|
|
CAMPAGNOLO CLEAT
1) Remove screw A.
2) Place the original Campagnolo cleat fixing it with screws C-M5X11mm, (suggested screw length for SiDi sole). We suggest leaving the screws B in place and periodically checking their fixing.
|
|
SPEEDPLAY CLEAT
See Illustration
|
|
Hardware Instructions
