|
 |
SiDi Technology: General Hardware |
HEEL CUP SYSTEM (HCS)
Instructions for the substitution:
Remove the label and unscrew the screw. |
|
CALLIPER BUCKLE
User instructions:
Insert serrated strap using slight pressure.
With a click lock movement; work with the lever for perfect micro adjustment closure.
To slightly loosen the closure during the race the central clip must be lifted.
To open, lift together both side buckles and release strap.
|
|
SOFT INSTEP CLOSURE SYSTEM/ARCH COMPRESSION STRAP
Instructions for the substitution and adjustment of the Instep Closure System
To remove and to extend the Instep Closure System, lift piece -A- slightly and then pull to extract.
Insert the new Instep Closure System -B- into the two openings -C- and adjust as desired.
If the strap is too long, proceed cutting the extra length.
|
|
ULTRA SL BUCKLE
User instructions:
Insert serrated strap using slight pressure.
With a click look movement, work with the lever for perfect micro adjustment closure.
To open, push both red wings and release strap.
To loosen the strap half click at a time, push the red wings alternately. Easy to adjust while racing.
Spider Micro Lock and straps are available as replacement parts.
If the strap is too long, proceed cutting the extra length.
|
|
TECNO II SYSTEM - T-II
How to substitute the Tecno II
Take the nylon string off its holder A.
Use a pointed object to push pin B out and then remove the red handle C and the cover D.
Hold the mechanism as you press down the regulator knob to unlock and to extract the mechanism from underneath.
To assemble the new mechanism, pass the nylon string under and through the mechanism.
|
|
Place the tab of the regulator into the corresponding space in the mechanism ring, then pull the nylon string hard and upwards to block the mechanism.
Put the cover D and the red handle C back into place. Make sure the holes are in line with the holes on the mechanism.
Insert the pin B
To fit the nylon string onto its holder. Pass the nylon string through the loop on the shoe tongue. Insert the nylon string into the holder from the round side.
|
HOW TO USE THE TECHNO II
To loosen the T-II closure, press the unlocking button down, following the direction indicated by the arrow and, at the same time, exercising a slight pressure while fitting the shoe.
Lift the semi-lunar handle and turn it clockwise up to the desired closure.
Pay attention to never turn the handle anticlockwise!!
|
|
HIGH-SECURITY VELCRO
The Velcro strap on the front part of the shoe features recessed (hidden) opposing polymer teeth that engage onto each other when the strap is closed.
This feature makes the closure more secure and the Velcro becomes absolutely unmovable.
|
|
WARNING
SiDi recommends using only insoles supplied, manufactured or distributed by Sidi on SiDi cycling shoes.
Insoles with different shapes or thicknesses can compromise the SiDi fit.
|
Hardware Instructions
